Question 1

The MDF is located in the basement of the building or on the first floor.

Accepted Answer

A) True 
 B)False

Question 2

A Private Branch Exchange (PBX) is typically found in residential dwelling especially single-family homes.

Accepted Answer

A) True 
 B)False

Question 3

A typical residential phone system is wired using _____.

Accepted Answer

A)   POTS wire
B)   Fiber Optic Cable
C)   Copper Clad Aluminum Wire
D)   Coaxial CableE) A) and D)
F) A) and C) A

Question 4

Match between columns
                        Premises: ________ automatically adjusts sound levels

Accepted Answer

The Answer of Compensator and Earpiece and Duplex Coil and is...

Question 5

Match between columns
                        Premises: ________ contains a microphone

Accepted Answer

The Answer of Earpiece and Duplex Coil and Hook Switch is...

Question 6

If you are dialing a number in the same area code as you, you don't have to dial all 10 digits.

Accepted Answer

A) True 
 B)False

Question 7

Match between columns
                        Premises: ________ Compresses the dc current to Control the loudness

Accepted Answer

The Answer of Duplex Coil and Mouthpiece and Compensator and is...

Question 8

The telephone wires inside your house are called _________.

Accepted Answer

A)   The demarc
B)   The local loop
C)   Premise wiring
D)   Vertical wiringE) A) and B)
F) A) and C)

Question 9

The wiring running from the MDF to the IDFs that complete a floor-to-floor run uses a riser cable.

Accepted Answer

A) True 
 B)False

Question 10

When the phone is on the hook the internal "hook switch" is open.

Accepted Answer

A) True 
 B)False

Question 11

Match between columns
                        Premises: ________ Provides auditory feedback from Mouthpiece to earpiece

Accepted Answer

The Answer of Hook Switch and Duplex Coil and Earpiece is...

Question 12

Which color combination is typically used as pair 1 on communication wire?

Accepted Answer

A)   Red and green
B)   Black and yellow
C)   Blue and white
D)   Brown and orangeE) A) and B)
F) A) and C)

Question 13

The TELCO must supply enough power to ring all the phones connected to a given telephone line.

Accepted Answer

A) True 
 B)False

Question 14

According to the National Electrical Code , all communications cables should be rated for not less that 150 V.

Accepted Answer

A) True 
 B)False

Question 15

The tip wire is connected to ground and the ring wire is connected to _____.

Accepted Answer

A)   3 or 6 V
B)   6 V
C)   12 or 24 V
D)   -48 VE) None of the above
F) All of the above

Question 16

Match between columns
                        Premises: ________ Indicates the status of the phone

Accepted Answer

The Answer of Duplex Coil and Hook Switch and Earpiece is...

Question 17

Which of the following represents the possible "tip" and "ring" wires of a telephone system?

Accepted Answer

A)   Green and Red
B)   Black and Yellow
C)   Blue and White
D)   All the aboveE) None of the above
F) A) and B)

Question 18

Adding more capacitance to a telephone line will decrease the amount of crosstalk.

Accepted Answer

A) True 
 B)False

Question 19

Match between columns
                        Premises: ________ Produces an ac voice signal riding on A dc current

Accepted Answer

The Answer of Compensator and Hook Switch and Earpiece and is...

Question 20

The demarcation point in any residential dwelling consists of a ________.

Accepted Answer

A)   Gas arrestor
B)   42A block protector
C)   RJ-11 block protector
D)   RJ-45 block protectorE) B) and D)
F) A) and C)

Exam 11: Telecommunications, and National Electrical Code Article 800

The MDF is located in the basement of the building or on the first floor.

Correct Answer
verified

A Private Branch Exchange (PBX) is typically found in residential dwelling especially single-family homes.

Correct Answer
verified

A typical residential phone system is wired using _____.

Correct Answer
verified
A

Match the description in the left column with the correct part of the phone in the right column and place the answer in the corresponding blank on your answer sheet. Some sensor types may be used more than once.

Match the description in the left column with the correct part of the phone in the right column and place the answer in the corresponding blank on your answer sheet. Some sensor types may be used more than once.

If you are dialing a number in the same area code as you, you don't have to dial all 10 digits.

Correct Answer
verified

Match the description in the left column with the correct part of the phone in the right column and place the answer in the corresponding blank on your answer sheet. Some sensor types may be used more than once.

The telephone wires inside your house are called _________.

Correct Answer
verified

The wiring running from the MDF to the IDFs that complete a floor-to-floor run uses a riser cable.

Correct Answer
verified

When the phone is on the hook the internal "hook switch" is open.

Correct Answer
verified

Match the description in the left column with the correct part of the phone in the right column and place the answer in the corresponding blank on your answer sheet. Some sensor types may be used more than once.

Which color combination is typically used as pair 1 on communication wire?

Correct Answer
verified

The TELCO must supply enough power to ring all the phones connected to a given telephone line.

Correct Answer
verified

According to the National Electrical Code , all communications cables should be rated for not less that 150 V.

Correct Answer
verified

The tip wire is connected to ground and the ring wire is connected to _____.

Correct Answer
verified

Match the description in the left column with the correct part of the phone in the right column and place the answer in the corresponding blank on your answer sheet. Some sensor types may be used more than once.

Which of the following represents the possible "tip" and "ring" wires of a telephone system?

Correct Answer
verified

Adding more capacitance to a telephone line will decrease the amount of crosstalk.

Correct Answer
verified

Match the description in the left column with the correct part of the phone in the right column and place the answer in the corresponding blank on your answer sheet. Some sensor types may be used more than once.

The demarcation point in any residential dwelling consists of a ________.

Correct Answer
verified

Exam 11: Telecommunications, and National Electrical Code Article 800

The MDF is located in the basement of the building or on the first floor.

Correct AnswerverifiedShow Answer

A Private Branch Exchange (PBX) is typically found in residential dwelling especially single-family homes.

Correct AnswerverifiedShow Answer

A typical residential phone system is wired using _____.

Correct AnswerverifiedA

Match the description in the left column with the correct part of the phone in the right column and place the answer in the corresponding blank on your answer sheet. Some sensor types may be used more than once.

Match the description in the left column with the correct part of the phone in the right column and place the answer in the corresponding blank on your answer sheet. Some sensor types may be used more than once.

If you are dialing a number in the same area code as you, you don't have to dial all 10 digits.

Correct AnswerverifiedShow Answer

Match the description in the left column with the correct part of the phone in the right column and place the answer in the corresponding blank on your answer sheet. Some sensor types may be used more than once.

The telephone wires inside your house are called _________.

Correct AnswerverifiedShow Answer

The wiring running from the MDF to the IDFs that complete a floor-to-floor run uses a riser cable.

Correct AnswerverifiedShow Answer

When the phone is on the hook the internal "hook switch" is open.

Correct AnswerverifiedShow Answer

Match the description in the left column with the correct part of the phone in the right column and place the answer in the corresponding blank on your answer sheet. Some sensor types may be used more than once.

Which color combination is typically used as pair 1 on communication wire?

Correct AnswerverifiedShow Answer

The TELCO must supply enough power to ring all the phones connected to a given telephone line.

Correct AnswerverifiedShow Answer

According to the National Electrical Code , all communications cables should be rated for not less that 150 V.

Correct AnswerverifiedShow Answer

The tip wire is connected to ground and the ring wire is connected to _____.

Correct AnswerverifiedShow Answer

Match the description in the left column with the correct part of the phone in the right column and place the answer in the corresponding blank on your answer sheet. Some sensor types may be used more than once.

Which of the following represents the possible "tip" and "ring" wires of a telephone system?

Correct AnswerverifiedShow Answer

Adding more capacitance to a telephone line will decrease the amount of crosstalk.

Correct AnswerverifiedShow Answer

Match the description in the left column with the correct part of the phone in the right column and place the answer in the corresponding blank on your answer sheet. Some sensor types may be used more than once.

The demarcation point in any residential dwelling consists of a ________.

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
A

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified